Nissan Qashqai 2024 Owners Manual
7.17. Traffic sign recognition (TSR) (Type A) (where fitted)
TSR Type A is for models with the [Driver Assist Custom] setting in the [Shortcut Menu] screen of the vehicle information display.
The Traffic Sign Recognition (TSR) system provides the driver with information about the most recently detected speed limit. The system captures the road sign information with the front camera unit (1) located in front of the interior rear-view mirror and displays the detected signs in the Vehicle Information Display and in the Head Up Display (HUD) (where fitted).
For vehicles equipped with NissanConnect, the speed limit displayed is based on a combination of navigation system data and live camera recognition. TSR information is always displayed at the top of the Vehicle Information Display, and optionally in the main central area of the display screen. See
for details of how to adapt the display of TSR information.The speed limit displayed is based on a combination of map data and live camera recognition. When a change of the speed limit is detected, the system notifies the driver with a speed display icon and a warning chime (once). If the vehicle exceeds the speed limit, the system warns the driver by flashing the speed display icon and issues warning chime (four times). The overspeed warning can be cancelled if the driver takes action to slow down or pushes the scroll dial on the steering-wheel mounted controls.
The TSR system is only intended to be a support device to provide the driver with information. It is not a replacement for the driver's attention to traffic conditions or responsibility to drive safely. It cannot prevent accidents due to carelessness. It is the driver's responsibility to stay alert and drive safely at all times.
Any indications and warnings provided by the TSR system will not override the actual speed limit applicable in a particular situation. It is the driver’s responsibility to observe and comply with the speed limits at all times.
The TSR system operates as follows:
The function will be automatically turned ON when the ignition switch is placed in the ON position.
If the license of the map data has expired, the map data cannot be used, which means that in some cases the speed limit display cannot be used.
To maintain the road sign display performance of the system, periodic updates of the map data are required. See
.The map data may not be automatically updated in some countries or at locations such as inside a tunnel where the required signal is unavailable.